Handmade Moroccan brass lighting is not created in a single step. It takes shape through a sequence of decisions and skilled handwork: choosing the metal, marking a pattern, piercing or engraving it, forming and joining the parts, and finishing the surface. In Fes, the exact method can vary with the design, the material, and the finish the maker is aiming for.
At BrassNoor, we work with both brass and copper. Each material responds differently to making and finishing, so the process is guided by the piece itself rather than one universal formula. This guide introduces the main stages of the work while distinguishing the methods used in our workshop from claims that would need to be checked for every Moroccan lighting maker.
1. Choosing the metal and planning the design
The process begins with a design and a decision about the metal. Brass and copper are both used in our workshop. The intended shape, pattern, and final appearance help determine how the piece will be made.
Planning matters because the pattern is not only decoration. On a pierced lamp, the openings will influence how light passes through the metal and how shadows appear on nearby walls and ceilings. The design must work as a pattern on the surface and as part of a lighting object.
2. Marking the pattern on the metal
For the pieces we make, the pattern can be marked directly onto the metal before the piercing begins. These marks act as a guide for the artisan’s hand. The design may be geometric, floral, or built from repeated ornamental elements, depending on the piece.
Pattern names and workshop terminology can vary. Rather than assigning one traditional name to every motif, it is more accurate to describe the visible pattern and confirm its local name with the maâlem when that information is available.
3. Piercing the metal by hand
Manual piercing, known in Moroccan craft vocabulary as tkhrim, creates the openings that allow light to pass through a lamp’s body. The artisan follows the marked design and works carefully around the spaces that must remain solid.
The balance between open and solid metal is important. The openings create the lamp’s visual rhythm, while the remaining metal holds the pattern together. Small differences in spacing and execution are part of the character of handwork; they should not be confused with a guarantee that every handmade piece will look identical.
4. Engraving and surface detail
Some pieces also receive engraving, known as naqsh in Moroccan craft usage. Engraving adds detail to the metal surface rather than creating the same kind of openings as piercing. Whether it is used depends on the design; it is not a step that every lamp necessarily requires.
Piercing and engraving can contribute different visual qualities. Piercing shapes the passage of light, while engraved lines can add detail that remains visible on the metal itself.
5. Forming and joining the parts
After the separate sections have been prepared, they are shaped and assembled into the intended form. The joining method can differ: in our workshop, assembly may use soldering or a heated iron or tool with another joining material, depending on the piece and the construction required.
It would be misleading to say that every Moroccan lamp is assembled in exactly the same way. The appropriate method depends on the component, the design, and the maker’s technique. Electrical components and mounting arrangements also need to suit the finished fixture and its intended installation.
6. Finishing the brass or copper
The surface finish changes how the metal looks and how it responds to light. Finishing options used in our workshop include polishing, aged effects, and bronzed appearances. Some pieces may also be varnished to help preserve a golden appearance.
For certain aged or bronzed effects, traditional workshop methods can use materials such as vinegar, lemon acid, or alum (chebba). These are not universal recipes: the result depends on the metal, the method, and the desired finish. They should not be treated as instructions for cleaning or treating a finished lamp at home.
Because finishes differ, care should match the particular piece. Avoid assuming that every brass lamp should be polished to a bright shine. For practical care advice, read How to Care for Handmade Moroccan Brass Lighting.
7. Seeing the lamp in light
A pierced brass lamp is experienced not only as a metal object but also through the light and shadow it produces. When illuminated, its openings project a pattern into the surrounding space. The effect changes with the design, the distance from nearby surfaces, and the light source.
For more on this relationship between pierced metal and atmosphere, explore How Pierced Brass Changes a Room After Dark.
Why handmade methods matter
Handmade does not mean that every stage is performed with the same tool or that every design follows an identical sequence. It means the making process relies on the artisan’s decisions and practiced handwork, with methods selected to suit the object. The marks, pierced openings, engraved details, joins, and finish all contribute to the character of the completed lamp.
At BrassNoor, we see Moroccan brass lighting as both a functional object and a form of craft. Understanding how it is made helps explain why the material, pattern, construction, and finish should be considered together—not as separate details, but as parts of one design.
Frequently asked questions
Are Moroccan lamps made only from brass?
No. Brass is widely associated with Moroccan metal lighting, but our workshop also works with copper. The material used depends on the design and the intended result.
Are all Moroccan brass lamps pierced by hand?
Methods can vary between makers and products. Manual piercing is a method used in our workshop for pierced designs, but it should not be assumed that every lamp on the market is made in the same way.
Does every lamp include engraving?
No. Engraving is used on some pieces, while other designs rely on piercing, shape, and finish.
How should a handmade brass lamp be cleaned?
Care depends on the finish. Start with gentle dusting using a soft, dry cloth or brush, and follow finish-specific guidance. Do not apply household acids or metal-cleaning recipes to a finished lamp without confirming that they are suitable for its finish.
Editorial note: This article describes methods confirmed for the BrassNoor workshop. Specific tool names, the exact order of operations, and the local names of individual patterns should be reviewed with the maâlem before this article is approved for publication.
